1 files changed, 186 insertions, 0 deletions

diff --git a/src/contrib/SDL-3.2.20/wayland-protocols/viewporter.xml b/src/contrib/SDL-3.2.20/wayland-protocols/viewporter.xml
new file mode 100644
index 0000000..c732d8c
--- /dev/null
+++ b/src/contrib/SDL-3.2.20/wayland-protocols/viewporter.xml
@@ -0,0 +1,186 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="viewporter">
+
+  <copyright>
+    Copyright © 2013-2016 Collabora, Ltd.
+
+    Permission is hereby granted, free of charge, to any person obtaining a
+    copy of this software and associated documentation files (the "Software"),
+    to deal in the Software without restriction, including without limitation
+    the rights to use, copy, modify, merge, publish, distribute, sublicense,
+    and/or sell copies of the Software, and to permit persons to whom the
+    Software is furnished to do so, subject to the following conditions:
+
+    The above copyright notice and this permission notice (including the next
+    paragraph) shall be included in all copies or substantial portions of the
+    Software.
+
+    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+    DEALINGS IN THE SOFTWARE.
+  </copyright>
+
+  <interface name="wp_viewporter" version="1">
+    <description summary="surface cropping and scaling">
+      The global interface exposing surface cropping and scaling
+      capabilities is used to instantiate an interface extension for a
+      wl_surface object. This extended interface will then allow
+      cropping and scaling the surface contents, effectively
+      disconnecting the direct relationship between the buffer and the
+      surface size.
+    </description>
+
+    <request name="destroy" type="destructor">
+      <description summary="unbind from the cropping and scaling interface">
+        Informs the server that the client will not be using this
+        protocol object anymore. This does not affect any other objects,
+        wp_viewport objects included.
+      </description>
+    </request>
+
+    <enum name="error">
+      <entry name="viewport_exists" value="0"
+             summary="the surface already has a viewport object associated"/>
+    </enum>
+
+    <request name="get_viewport">
+      <description summary="extend surface interface for crop and scale">
+        Instantiate an interface extension for the given wl_surface to
+        crop and scale its content. If the given wl_surface already has
+        a wp_viewport object associated, the viewport_exists
+        protocol error is raised.
+      </description>
+      <arg name="id" type="new_id" interface="wp_viewport"
+           summary="the new viewport interface id"/>
+      <arg name="surface" type="object" interface="wl_surface"
+           summary="the surface"/>
+    </request>
+  </interface>
+
+  <interface name="wp_viewport" version="1">
+    <description summary="crop and scale interface to a wl_surface">
+      An additional interface to a wl_surface object, which allows the
+      client to specify the cropping and scaling of the surface
+      contents.
+
+      This interface works with two concepts: the source rectangle (src_x,
+      src_y, src_width, src_height), and the destination size (dst_width,
+      dst_height). The contents of the source rectangle are scaled to the
+      destination size, and content outside the source rectangle is ignored.
+      This state is double-buffered, and is applied on the next
+      wl_surface.commit.
+
+      The two parts of crop and scale state are independent: the source
+      rectangle, and the destination size. Initially both are unset, that
+      is, no scaling is applied. The whole of the current wl_buffer is
+      used as the source, and the surface size is as defined in
+      wl_surface.attach.
+
+      If the destination size is set, it causes the surface size to become
+      dst_width, dst_height. The source (rectangle) is scaled to exactly
+      this size. This overrides whatever the attached wl_buffer size is,
+      unless the wl_buffer is NULL. If the wl_buffer is NULL, the surface
+      has no content and therefore no size. Otherwise, the size is always
+      at least 1x1 in surface local coordinates.
+
+      If the source rectangle is set, it defines what area of the wl_buffer is
+      taken as the source. If the source rectangle is set and the destination
+      size is not set, then src_width and src_height must be integers, and the
+      surface size becomes the source rectangle size. This results in cropping
+      without scaling. If src_width or src_height are not integers and
+      destination size is not set, the bad_size protocol error is raised when
+      the surface state is applied.
+
+      The coordinate transformations from buffer pixel coordinates up to
+      the surface-local coordinates happen in the following order:
+        1. buffer_transform (wl_surface.set_buffer_transform)
+        2. buffer_scale (wl_surface.set_buffer_scale)
+        3. crop and scale (wp_viewport.set*)
+      This means, that the source rectangle coordinates of crop and scale
+      are given in the coordinates after the buffer transform and scale,
+      i.e. in the coordinates that would be the surface-local coordinates
+      if the crop and scale was not applied.
+
+      If src_x or src_y are negative, the bad_value protocol error is raised.
+      Otherwise, if the source rectangle is partially or completely outside of
+      the non-NULL wl_buffer, then the out_of_buffer protocol error is raised
+      when the surface state is applied. A NULL wl_buffer does not raise the
+      out_of_buffer error.
+
+      The x, y arguments of wl_surface.attach are applied as normal to
+      the surface. They indicate how many pixels to remove from the
+      surface size from the left and the top. In other words, they are
+      still in the surface-local coordinate system, just like dst_width
+      and dst_height are.
+
+      If the wl_surface associated with the wp_viewport is destroyed,
+      all wp_viewport requests except 'destroy' raise the protocol error
+      no_surface.
+
+      If the wp_viewport object is destroyed, the crop and scale
+      state is removed from the wl_surface. The change will be applied
+      on the next wl_surface.commit.
+    </description>
+
+    <request name="destroy" type="destructor">
+      <description summary="remove scaling and cropping from the surface">
+        The associated wl_surface's crop and scale state is removed.
+        The change is applied on the next wl_surface.commit.
+      </description>
+    </request>
+
+    <enum name="error">
+      <entry name="bad_value" value="0"
+             summary="negative or zero values in width or height"/>
+      <entry name="bad_size" value="1"
+             summary="destination size is not integer"/>
+      <entry name="out_of_buffer" value="2"
+             summary="source rectangle extends outside of the content area"/>
+      <entry name="no_surface" value="3"
+             summary="the wl_surface was destroyed"/>
+    </enum>
+
+    <request name="set_source">
+      <description summary="set the source rectangle for cropping">
+        Set the source rectangle of the associated wl_surface. See
+        wp_viewport for the description, and relation to the wl_buffer
+        size.
+
+        If all of x, y, width and height are -1.0, the source rectangle is
+        unset instead. Any other set of values where width or height are zero
+        or negative, or x or y are negative, raise the bad_value protocol
+        error.
+
+        The crop and scale state is double-buffered state, and will be
+        applied on the next wl_surface.commit.
+      </description>
+      <arg name="x" type="fixed" summary="source rectangle x"/>
+      <arg name="y" type="fixed" summary="source rectangle y"/>
+      <arg name="width" type="fixed" summary="source rectangle width"/>
+      <arg name="height" type="fixed" summary="source rectangle height"/>
+    </request>
+
+    <request name="set_destination">
+      <description summary="set the surface size for scaling">
+        Set the destination size of the associated wl_surface. See
+        wp_viewport for the description, and relation to the wl_buffer
+        size.
+
+        If width is -1 and height is -1, the destination size is unset
+        instead. Any other pair of values for width and height that
+        contains zero or negative values raises the bad_value protocol
+        error.
+
+        The crop and scale state is double-buffered state, and will be
+        applied on the next wl_surface.commit.
+      </description>
+      <arg name="width" type="int" summary="surface width"/>
+      <arg name="height" type="int" summary="surface height"/>
+    </request>
+  </interface>
+
+</protocol>